Xbox Hackz
Hacking and Online Gaming

<< Mod Chips >>

DVD Dongle - IR signal led (v0.1) - Thanks To Xbox-scene.com

Tutorial written by : Elfig[]
Last edited: December 16, 2003

Welcome to this tutorial.
We’ll learn how to add a LED on the dongle to blink when it senses the ir signal. Is this useful? No but It's cool.

Tools necessary:
- Dvd Kit (I used the official M$)
- Knife (to open up the DVD dongle)
- Solder Equipment
- Wire
- Drill
- 3mm Led
- 100ohm resistor

Let's test...

...And finally the solution...

...Everytime you click a button on the remote the LED lights up.

Have fun. I maintain no responsibility if you harm your Xbox doing this mod.

Tutorial written by : Elfig[]

<--- Go Back

Copyright © 2001-2004 XboxHackz.com All rights reserved.

<< XboxHackz.com - Home >>